Note: This document is for an older version of GRASS GIS that will be discontinued soon. You should upgrade, and read the current manual page.
NAME
r3.in.lidar - Creates a 3D raster map from LAS LiDAR points using univariate statistics.
KEYWORDS
raster3d,
import,
LIDAR,
statistics,
conversion,
aggregation,
binning
SYNOPSIS
r3.in.lidar
r3.in.lidar --help
r3.in.lidar [-dvopsg] [input=name] [file=name] [n=name] [sum=name] [mean=name] [proportional_n=name] [proportional_sum=name] [return_filter=string] [class_filter=integer[,integer,...]] [base_raster=name] [zscale=float] [intensity_range=min,max] [intensity_scale=float] [--overwrite] [--help] [--verbose] [--quiet] [--ui]
Flags:
- -d
- Use base raster actual resolution instead of computational region
- -v
- Use only valid points
- Points invalid according to APSRS LAS specification will be filtered out
- -o
- Override projection check (use current location's projection)
- Assume that the dataset has same projection as the current location
- -p
- Print LAS file info and exit
- -s
- Scan data file for extent then exit
- -g
- In scan mode, print using shell script style
- --overwrite
- Allow output files to overwrite existing files
- --help
- Print usage summary
- --verbose
- Verbose module output
- --quiet
- Quiet module output
- --ui
- Force launching GUI dialog
Parameters:
- input=name
- LAS input file
- LiDAR input file in LAS format (*.las or *.laz)
- file=name
- File containing names of LAS input files
- LiDAR input files in LAS format (*.las or *.laz)
- n=name
- Count of points per cell
- Name for output 3D raster map
- sum=name
- Sum of values of point intensities per cell
- Name for output 3D raster map
- mean=name
- Mean of point intensities per cell
- Name for output 3D raster map
- proportional_n=name
- 3D raster map of proportional point count
- Point count per 3D cell divided by point count per vertical column
- proportional_sum=name
- 3D raster map of proportional sum of values
- Sum of values per 3D cell divided by sum of values per vertical column
- return_filter=string
- Only import points of selected return type
- If not specified, all points are imported
- Options: first, last, mid
- class_filter=integer[,integer,...]
- Only import points of selected class(es)
- Input is comma separated integers. If not specified, all points are imported.
- base_raster=name
- Subtract raster values from the z coordinates
- The scale for z is applied beforehand, the filter afterwards
- zscale=float
- Scale to apply to Z data
- Default: 1.0
- intensity_range=min,max
- Filter range for intensity values (min,max)
- intensity_scale=float
- Scale to apply to intensity values
- Default: 1.0
The
r.in.lidar module
is very similar to the
r3.in.lidar module and many parts of
its documentation apply also for
r3.in.lidar.
Figure: Proportional count of points per 3D cell. When 50% of all
points in a vertical column fall into a given 3D cell, the value
is 0.5. Here, the green color was assigned to 0.5, red to 1 and
yellow to 0. The figure shows vertical slices and green color
indicates high vegetation while red color indicates bare ground.
-
This module is new and partially experimental. Please don't rely
on its interface and be critical towards its outputs.
Please report issues on the mailing list or in the bug tracker.
-
No reprojection is performed, you need to reproject ahead or
use GRASS Location which has the right coordinate system
which fits with the data.
-
Some temporary maps are created but not cleaned up. Use of
--overwrite might be necessary even when not desired.
-
Expects points to have intensity and causing random (undefined)
result for related outputs (sum, mean, proportional_sum)
when the intensity is not present but the outputs were requested.
Set the region according to a 2D raster and adding 3D minimum
(bottom), maximum (top) and vertical (top-bottom) resolution.
g.region rast=secref b=80 t=160 tbres=5 -p3
Now,
r3.in.lidar will create the 3D raster of the size
given by the computation region:
r3.in.lidar input=points.las n=points_n sum=points_sum \
mean=points_mean proportional_n=points_n_prop \
proportional_sum=points_sum_prop
Create ground raster:
r.in.lidar input=points.las output=ground method=mean class_filter=2
Set vertical extent of computational region to (relative) coordinates
above ground:
g.region rast=secref b=0 t=47 -p3
Compute point density:
r3.in.lidar input=points.las n=points_n sum=points_sum \
mean=points_mean proportional_n=points_n_prop \
proportional_sum=points_sum_prop \
base_raster=ground
Compute the point density of points in 2D while setting the output
extent to be based on the data (
-e) and the resolution set to
a relatively high number (here 10 map units, i.e. meters for
metric projections).
r.in.lidar input=points.las output=points_n method=n -e resolution=10
This step can be repeated with using different resolutions (and the
--overwrite flag) to determine the resolution for the further
analysis.
The class_filter option should be also provided if only part of
the points is analyzed, for example class_filter=3,4,5 would be
used for low, medium, and high vegetation if the LAS file follows the
usedstandard ASPRS class numbers.
The resolution should be suitable for computing digital elevation model
which will be computed in the next steps.
Once you decided on the resolution, you can use the 2D raster to set the
computational region extent and resolution:
g.region raster=points_n -p3
class_filter=2 is used to limit
r.in.lidar input=points.las output=ground_mean method=mean class_filter=2
The following steps are not necessary if the point density is high
enough to fill the raster continuously.
Convert the raster to vector point resulting in a decimated point cloud:
v.to.rast input=ground_mean type=point output=ground_decimated use=z
Interpolate the ground surface from the decimated ground points:
v.surf.rst input=ground_decimated elevation=ground
Now we need to determine upper vertical limit for the 3D raster
(the top value from
g.region -p3). This can be potentially
done with lower resolution. The
-d flag ensures that the ground
raster will be used in its actual resolution regardless of the
resolution of the output.
r.in.lidar input=points.las method=max output=veg_max class_filter=3,4,5 base_raster=ground -d
With that, we can finally set up the 3D extent and resolution:
g.region rast=secref b=0 t=40 res=1 res3=1 -p3
Note that the 2D and 3D resolutions are separate so that user can
perform the 2D calculations on a finer resolution than the 3D
calculations. The vertical resolution can be and often is set to a
different value as well. Here we use the same value for all resolutions
for simplicity.
Finally, we perform the 3D binning where we count number of points per
cell (voxel):
r3.in.lidar input=points.las n=n class_filter=3,4,5 base_raster=ground -d
r3.in.xyz,
r.in.lidar,
v.in.lidar,
r.to.rast3,
r3.to.rast,
r3.mapcalc,
g.region
Vaclav Petras,
NCSU GeoForAll Lab
SOURCE CODE
Available at:
r3.in.lidar source code
(history)
Latest change: Mon Dec 30 23:38:16 2019 in commit: ac13b0de4b36d30515425d7310a4c25ca5f358eb
Note: This document is for an older version of GRASS GIS that will be discontinued soon. You should upgrade, and read the current manual page.
Main index |
3D raster index |
Topics index |
Keywords index |
Graphical index |
Full index
© 2003-2023
GRASS Development Team,
GRASS GIS 7.8.8dev Reference Manual