r.to.rast3 - GRASS GIS manual

Note: This document is for an older version of GRASS GIS that will be discontinued soon. You should upgrade, and read the current manual page.

NAME

r.to.rast3 - Converts 2D raster map slices to one 3D raster volume map.

KEYWORDS

raster, conversion, voxel

SYNOPSIS

r.to.rast3

r.to.rast3 --help

r.to.rast3 [-m] input=name[,name,...] output=name [tilesize=integer] [--overwrite] [--help] [--verbose] [--quiet] [--ui]

Flags:

-m: Use 3D raster mask (if exists) with output map
--overwrite: Allow output files to overwrite existing files
--help: Print usage summary
--verbose: Verbose module output
--quiet: Quiet module output
--ui: Force launching GUI dialog

Parameters:

input=name[,name,...] [required]: 2D raster maps which represent the slices
output=name [required]: Name for output 3D raster map
tilesize=integer: The maximum tile size in kilo bytes. Default is 32KB.; Default: 32

DESCRIPTION
NOTES
EXAMPLES
- EXAMPLE 1
- EXAMPLE 2
SEE ALSO
AUTHOR

DESCRIPTION

Converts 2D raster map(s) into one raster3D map. It is important to properly set the 3D region settings, especially number or layers and depth of layers. If the 2D and 3D region settings are different, the 2D resolution will be adjusted to the 3D resolution.

How r.to.rast3 works

NOTES

Every 2D raster map is copied as one slice to the raster3D map. Slices are counted from bottom to the top, so the bottom slice has to be number 1.

If less number of 2D raster maps are provided than defined depths, the last given 2D map is used to fill up the remaining raster3D slices to the top.

EXAMPLES

EXAMPLE 1

This example shows how to convert 6 maps into one 3D map with 6 layers.

# Mapset data in Location slovakia3d
g.region raster=prec_1,prec_2,prec_3,prec_4,prec_5,prec_6 -p
g.region b=0 t=600 tbres=100 res3=100 -p3
r.to.rast3 input=prec_1,prec_2,prec_3,prec_4,prec_5,prec_6 output=new_3dmap

EXAMPLE 2

This example shows how to convert 3 maps into one 3D map with 6 layers.

# Mapset data in Location slovakia3d
g.region b=0 t=600 tbres=100 res3=100 -p3
r.to.rast3 input=prec_1,prec_2,prec_3 output=new_3dmap

AUTHOR

Soeren Gebbert

SOURCE CODE

Available at: r.to.rast3 source code (history)

Latest change: Mon Nov 18 20:15:32 2019 in commit: 1a1d107e4f6e1b846f9841c2c6fabf015c5f720d