54. Mills handling cereal crops

Contents - Previous - Next

Contents

1. Scope

2. Environmental impacts and protective measures

2.1 Cereal storage and handling

2.1.1 Port and transshipment silos, mill silos
2.1.2 Cooperative stores and warehouses
2.1.3 Seed cleaning installations
2.1.4 Drying installations

2.2 Flour mills (wheat mills)
2.3 Hulling mills

2.3.1 Rice mills
2.3.2 Hulling and processing of sorghum and millet
2.3.3 Pulse hulling

2.4 Location planning
2.5 Energy from husk waste
2.6 Further processing of cleaning waste and mill afterproducts
2.7 Dust disposal

3. Notes on the analysis and evaluation of environmental impacts

4. Interaction with other sectors

5. Summary assessment of environmental relevance

6. References

1. Scope

The sector embraces mills handling cereal crops, including warehousing for raw materials and end products, and also animal feed production and seed dressing, operations which are almost always linked to the cereal processing complex.

The only milling industries to be considered in the study are those involved in manufacturing end products for human consumption from raw materials imported or grown in rural areas, with animal feed simply a by-product.

Below, the environmentally relevant factors of noise, dust, process water and pesticides are considered.

The sector concerned can be divided essentially into four parts:

- storage, drying and seed dressing,
- flour mills,
- hulling mills,
- heat treatment.

Projects for the drying and storage of locally grown cereal and for seed conditioning have been given a boost recently and have been priority now that it is realised that raw materials for food need to be protected from spoilage and perishing due to climatic conditions, pests etc. and that better seed increases production.

Modern industrial mills have an integrated silo and warehouse capacity for the raw material to be processed and the end products and by-products manufactured. Depending on the site, ownership and the general purpose of the plants, drying and seed cleaning plants may be incorporated. By-products are often recycled as animal feed components.

2. Environmental impacts and protective measures

Given the processing techniques employed today, it may generally be assumed that large volumes of air are required to produce milled and hulled products (flour, wholemeal products, flakes, grains etc.), in addition to power for cleaning, hulling, grinding (milling) and the transport of intermediate and end products.

This air is used mainly for vertical and horizontal transfer inside the milling or hulling system and for dust extraction from the processing units and the entire mill complex. Furthermore, under certain climatic conditions cool air is required to ventilate power plant and processing machinery as well as the entire building complex.

Industrial wastewater is produced only in the cereal washing department in the mill industry, and even then only where granular or wholemeal products are to be produced. The modern mill industry makes particular use of a dry cleaning process which separates out impurities by means of screens and weighing sorters. If the plant also produces bulgur and parboiled rice, process water with a low starch content is produced.

The wastewater from waste-recycling power generating plants, particularly that from rice husk gasification for the production of lean gas for gas-engine powered plants, has a phenol content of over 0.03 mg/l. When husks are burnt to produce steam, a residual quantity of 18% ash in relation to the quantity input must be disposed of. The same applies to gas plants.

It can therefore generally be stated that the environmental impacts of the mill operation lie in the following areas:

- dust emission,
- noise nuisance,
- hazard of dust explosions and fires,
- odour nuisance to a limited degree,
- hazard of toxic gas,
- recycling of residual substances and waste disposal,
- process water.

2.1 Cereal storage and handling

2.1.1 Port and transshipment silos, mill silos

Storage installations of this kind are used for the storage and transshipment of cereal for import and export. They are found in all major ports where imported cereals (wheat, maize, rice, millet etc.) as well as raw products and semi-finished products for the food and animal feed industry are put into store for intermediate storage, and from which the domestic industry is supplied with raw materials or goods for export are shipped (maize, rice, millet, tapioca etc.).

The following table shows the dust content of the service air from the various mill sections and admissible emission values in Germany.

Table 1 - Pollutants produced and admissible emission values in Germany

In storage installations with preliminary cleaning plants and in mills, dust emissions are collected in aspiration pipe systems during cleaning, and separated with the help of cyclones and filters. To achieve the best possible removal of dust from machines and buildings, all equipment handling materials and machinery should be enclosed and fitted with appropriate aspiration connections. The extraction of dust with so-called mass separators or filter separators is described and explained in the guidelines nos. 3676 and 3677 of the Association of German Engineers VDI. The safety measures in these guidelines should be observed.

With the high degree of mechanisation in modern mills, the only workplaces where dust is a problem are the loading and packing operations; here too, extraction devices must be used wherever possible.

All the dust from aspiration systems and cleaning in transshipment silo installations is collected and bagged.

The cleaning waste, which may contain live pests, is to be destroyed immediately.

In mill-cleaning plants, dust waste and granular cleaning waste is treated and added to mill afterproducts (bran) (feed ingredient).

Noise is another environmental problem. The increasing use of high-speed technical equipment and the intensive use of machines in the smallest possible space give rise to an increasing noise nuisance which is becoming a hazard to man.

Precautions must be taken to protect employees and local residents. Structural measures, such as the lining of ceilings and walls with soundproofing materials, must be taken, and vibration isolation materials must be used for machine foundations.

The TA-Lärm [Technical Instructions on Noise Abatement] in Germany lays down, for the various industrial and residential areas and mixed use areas, safety guidelines for immissions which must be observed in the planning and erection of industrial plants.

Personnel must be issued with hearing protection where they are constantly exposed to noise levels of over 70 dB.

Information and training must therefore be provided for personnel, and compliance with safety measures monitored.

People, buildings and the machine stock can be at risk from dust explosions and fires. Following any such explosion, there is a chemical conversion of a dust/air mixture, which accelerates as heat is generated, causing a sudden pressure effect from existing or newly formed gases. Three components constitute the basis for a dust explosion: dust, air (oxygen) and ignition energy; the latter can be in the form of heat or electricity (electrostatic charging).

Silo installations are particularly at risk from dust explosions. Mechanical sparks, pockets of glowing materials, mechanical heating, hot surfaces, welding work, electrostatic discharge sparks and the like are possible ignition sources. They must be eliminated as a safety measure, and the formation of explosive dust concentrations must be prevented, for example by enclosing machines. Structural precautions can also be taken, namely the creation of compression-proof rooms and pressure release and explosion suppressing systems. The following organisational precautions are also effective in terms of fire and explosion safety:

- welding and cutting works only to be carried out during factory shutdowns;
- regular cleaning with dust-explosion-proof equipment;
- training of employees in the handling of fire-fighting equipment and
- information to employees about the causes of dust fires and explosions.

Finally, in the planning phase, provision must be made for taking all the measures required to limit the risk of explosion (cf. in Germany, VDI guideline, 2263 on dust fires and dust explosions - Staubbrände und Staubexplosionen).

Gases are most commonly used to protect stocks (pest control) in the silo installations and warehouses, but under certain circumstances sprays and vapours are an option.

The types of pest control agent for cereals currently used and approved in Germany include gaseous insecticides:

- hydrogen phosphide,
- methyl bromide,
- hydrogen cyanide.

In addition to gases, fumigants and sprays can be used for the disinfestation of silos and stores - without any need to include stocks in the treatment.

The following are approved in Germany:

- lindane
- bromophos,
- malathion,
- dichlorvos,
- piperonyl butoxide,
- pyrethrum
- and combinations of these.

The incorrect use of agents for pest control for stock protection purposes can lead to hazardous substances seeping into adjacent production or residential buildings (e.g. hydrogen phosphide). Therefore, particular attention must be paid to the technique of pest control (e.g. silo fumigation using a circulation system).

Specific bans or restrictions on the use of these agents are recorded in the plant pesticide register of the country concerned or may be requested from the registration office for these substances. The manufacturer's instructions must be strictly observed and made available in the local language.

After treatment, waiting periods must be observed to ensure that plant products do not contain higher residue levels than are permissible where they are to be brought into circulation or eaten (cf. environmental brief, Analysis, Diagnosis, Testing and Volume III, Compendium of Environmental Standards (CES)).

Authorised contractors must be employed for the application of agents to protect commodities stored in silos and warehouses; their personnel must be appropriately trained and able to use the special equipment and safety installations.

2.1.2 Cooperative stores and warehouses

Simple storage installations (including raw material stores) are warehouses for bagged commodities or for horizontal storage. Bagged commodities or loose grains are cleaned, stored, ventilated and may also be treated as a pest control measure. Most maize, rice and sorghum harvests are still stored in this way in many countries, with possible storage losses of 15% or more.

Figure 1 - Diagram of a port and transshipment silo installation

Standard warehouses should also have installations for cleaning, ventilation and fumigation.

The risk of dust explosions can be largely avoided in warehouses by a light and open design, although this does not protect against normal types of fires which can occur. Otherwise, the environmental implications are as described in 2.1.1. Pest control in warehouses may take the form of sprays although fumigation is also commonplace.

The safety measures for silo installations described in 2.1.1 are also applicable to warehouses, with the exception of measures against the risk of explosion.

Special precautions must be taken where gases are used for pest control purposes. As bagged commodities cannot be fumigated in airtight areas, gastight fumigation tarpaulins, sealed underneath with sand, are required if this type of pest control is to be used.

2.1.3 Seed cleaning installations

Seed dressing is not considered part of a mill's activities, but in many countries it is one of the services a cooperative storage facility may offer its members.

In using these facilities seed is produced with a higher grade purity thanks to air, screen and specific weight classification. The lower content of other types of grain and the improved growth conditions resulting from chemical treatment improve quality and thus yields per hectare.

The service air from seed cleaning plants contains primary dust. It and the cleaning waste produced (rejected grain, weed seeds etc.) can be used for animal feed production.

Treatment involves the wet or dry application of fungicides and insecticides which - as pesticides - protect the seed and are classified as seed treatment agents. All such treatments approved by the Biologische Bundesanstalt für Land- und Forstwirtschaft (Federal Biological Research Centre for Agriculture and Forestry) in Germany are listed in the pesticide register Pflanzenschutzmittel-Verzeichnis (1990).

These plant pesticides are used in seed improvement operations either alone or in combination depending on the purpose of the treatment.

Common pesticides (active ingredients) are:

- anthraquinone,
- bibertanol,
- bendiocarb,
- fuderidazol,
- bromophos,
- lindane,
- carboxin,
- fenfuram etc.

Environmental measures in seed cleaning operations are confined, in terms of aspiration and service air, to keeping the production rooms and the outgoing waste air clean. The filter installations listed in paragraph 2.1.1 and the emission values shown in table 1 are applicable here.

When protecting seeds, appropriate precautions must be taken to protect personnel and, subsequently, users.

The approval regulations of the individual countries must be obeyed as must the manufacturer's recommendations for use (see too Volume III, CES).

Figure 2 - Diagram of a seed cleaning installation

2.1.4 Drying installations

Grain drying is a thermal process in which water is removed from the pre-cleaned damp commodities (cereal, maize, rough rice (paddy), sorghum etc.) by evaporation. Obviously, an adequate supply of heat is essential. The drying of the moist harvested produce is usual in warehousing facilities and the agricultural trade (cooperatives), and mill and silo facilities often have drying installations too. Thus, wherever large quantities of damp grain (moisture content of over 15%) are supplied, rapid drying is called for. Drying installations are used where natural sun drying is not practicable in view of the weather conditions (rainy season). Only dry commodities can be safely stored for prolonged periods without any deterioration in quality.

The service air of drying installations and the preliminary cleaning machines contains coarse to fine particles of dust which need to be separated by means of the dust separators described in paragraph 2.1.1. Drying installations are only used at harvest time, and should preferably be sited close to the (sparsely populated) growing areas. Noise is another problem. Very often mill and silo facilities also have drying installations.

The safety measures listed in 2.1.1 to protect against dust and noise must be taken here too.

Figure 3 - Diagram of a drying installation

2.2 Flour mills (wheat mills)

The purpose of a flour mill is to obtain large quantities of flour which also meet flour product requirements in terms of quality. The by-products and afterproducts (bran, middling and cleaning waste) are recycled in agriculture or in the animal feed industry in the form of feed components. Mills also make wholemeal products.

In some cases, very antiquated washing machines are still used today for cereal cleaning in the wheat mill industry, requiring monitoring of wastewater quantities (up to 1000 l/t), thus safe distances from residential areas must be maintained. In the modern cereal mill, water is only used for conditioning (wetting) the cereal and it is fully absorbed by the grain. Today, the entire cleaning process is carried out by means of air, screening and weight classification. Scouring machines have largely replaced the washing systems, thus no industrial wastewater is now produced.

In conventional mills handling cereal crops, some 5 - 10 cubic metres of air are required per milled tonne. This quantity drops to just 15% where machines working on the circulating air principle are used for cleaning. All service air discharged into the atmosphere must be filtered.

There is also a fire risk due to dust explosions in mills, and mills handling cereal crops as a whole generate noise emissions which have environmental implications for humans.

All safety measures described for cereal storage are appropriate for mills handling cereal crops in all respects. If silo installations are structurally linked to the mill, not only must automatic fire valves be fitted in the interconnecting materials handling equipment, but also the connecting walls between the installations must constitute fire barriers²¹⁾. A settling tank for organic substances (husks, pieces of stem, fines etc.) must be provided.

²¹⁾ For this reason, safe distances from populated areas must be maintained.

Figure 4 - Diagram of a wheat mill

2.3 Hulling mills

Hulling mills handle the following cereal types: oats, barley, rice, sorghum and millet, as well as pulses. While hulling mill technology is very different from that used in mills handling cereal crops, the environmental pollution and the resultant safety measures are largely similar in both types of mill.

2.3.1 Rice mills

The process from rough rice (paddy) through to ready-to-use white rice passes from cleaning with air, screening and weighing, dehulling and the polishing process (removal of the aleurone layer) through to sizing. Some countries have their own production from low to medium capacity rice mill facilities (China, Taiwan, Malaysia, Thailand, India and some South American countries).

The environmental pollution from rice mills in these countries is considerable if there are no complete aspiration systems or such systems are not designed to appropriate technical standards. Often, cyclones alone are used for dust separation although they only achieve a separation level of 90 - 95%, with dust emissions standing at 70 to 150 mg/m³ air. Dust filters must be used.

The major disposal problem for rice mills is presented by the rice husks from the production process (20%). One possible means of economically recycling rice husks is that of pyrolysis to produce energy in steam power plants or lean gas for gas-engine plants (see environmental brief Plant Production).

Hot industrial water (approx. 65°C) and saturated steam are used to make parboiled rice (rice precooked in the husk).

Apart from the rice husks, all other by-products are either used locally as animal feed or exported (rice polish/emery flour).

A residue of about 18% ash is produced by rice hull pyrolysis. Ash can be disposed off locally as a soil structure improver and more recently rice hull ash has been used in steel works as an insulant.

Where parboiled rice is produced, organic substances are found in the wastewater, but in such small quantities that their recovery is not economical. Approx. 1 cubic metre of drinking quality water is required per tonne of rough rice (paddy), approximately 30% of which is absorbed by the grain.

Otherwise, the environmental impacts are as described in paragraphs 2.1.1 and 2.2.

The environmental protection measures to be observed for rice mills are listed here in order of priority:

- Dust emission values as applicable in mills handling cereal crops must also be observed in rice mills, i.e. modern aspiration systems with separators and filter installations must be used.
- Noise emissions are a nuisance to the population living in the surrounding area and so the details per sections 2.1.1 and 2.2 apply for this industry.
- The use of biodegradation tanks is recommended for wastewater disposal from parboiling facilities because of the higher starch concentrations.
- Measures must be taken to ensure proper hull disposal. In addition to pyrolysis and soil structure improvement, the hulls can be used in the brick industry, distilleries and possibly for furfurol production. Other uses are technically feasible and should be considered in the light of the particular site.

2.3.2 Hulling and processing of sorghum and millet

The industrial processing of sorghum and millet produces flours with good keeping properties and enables quality to be controlled in the light of the end products to be made. Better quality flours and higher yields are therefore achieved.

The upturn in the fortunes of this new branch of milling has been further enhanced by the possibility of blending this flour with wheat flour (composite flour). This has enabled a number of countries to use local raw materials by producing flours of this kind (blends of up to 20%).

The pollutants produced and safety measures to be taken are based on the data in paragraph 2.2.1.

2.3.3 Pulse hulling

The produce processed in hulling mills includes a range of pulses which are grown in temperate climates as well as the tropics. Pulses such as chickpeas, lentils and local bean varieties are brought onto the market in their hulled/split form or as flour.

The pollutants produced and safety measures to be taken are similar to the substances and measures described in paragraph 2.1.1.

2.4 Location planning

When planning the location of a food industry facility, it must be assumed that medium-sized and large operations will be accommodated. In such mass-production plants where food is processed, manufactured, transported, loaded and unloaded or stored, the following environmental factors must be taken into account, for which detailed information can be found in the relevant environmental briefs:

- An organised transport system is necessary as facilities of this kind turn over substantial quantities of raw materials and finished products (environmental brief and Transport and Traffic Planning).
- When planning larger facilities, a sea/land/sea transshipment facility should also be provided (environmental briefs Inland Ports and Ports and Harbours, Harbour Works and Operations).
- As facilities of this kind run day and night, they must be sited at appropriate distances from residential areas. Dust, and above all noise nuisance, must be prevented (environmental brief Planning of Locations for Trade and Industry).
- There should be a reliable energy supply on site to ensure safe operation of larger plants (environmental brief Overall Energy Planning).
- Furthermore, for safety reasons, they must be sited further from other industrial plants so that in the event of incidents (fire, dust explosion) extensive damage can be avoided.
- A water supply and organised disposal facilities are absolutely essential (environmental brief Water Framework Planning, Wastewater Disposal).

The fundamental factors in site selection (e.g. avoidance of agricultural areas or rare/valuable areas of countryside) are likewise to be found in the environmental brief on Planning of Locations for Trade and Industry.

2.5 Energy from husk waste

The energy requirement of milling plants ranges from 30 to 70 kWh per tonne of end product, and that of rice mills 30 kWh. One economic and environmental objective should be the use of the husks from rice production (approx. 20%) as a source of energy.

Waste gas emissions from the chimneys of steam power plants are becoming an environmental problem due to their ash particle content. When incinerated, a residual quantity of about 18% ash remains.

Where gas is produced from husks, industrial water is used for gas scrubbing to separate tar and dust, and also as cooling water for the gas reactor. This wastewater contains up to 1.6 mg/l phenol. The ash produced by husk pyrolysis must also be disposed of.

All residues from husk burning in the ash disposal section of steam power plants should be collected in its dry form; after cooling and intermediate storage, the ash can be reused by agriculture and industry. Fly ash in the chimney must be separated by scrubbing with dust separators before it enters the waste gas chimney.

Wastewater from gas generators may only be released once it has been neutralised and freed from solids. Venturi scrubbers and biological plant tanks must be used for tar separation.

Even at the planning stage of these power plants, ash disposal, flue gas emission and wastewater disposal must be considered in the light of parallel municipal development.

2.6 Further processing of cleaning waste and mill afterproducts

Normally waste from mills handling cereal crops is immediately milled in hammer mills and then, together with mill afterproducts, supplied to the animal feed industry. Other mill afterproducts are bran and low-grade flour, and from the hulling mill, hull bran.

This industry, often regarded as a secondary operation in mills, produces fodder concentrate for livestock farming, which contains protein, carbohydrate, fats, mineral substances and vitamins as its main blending components.

2.7 Dust disposal

Dust requiring disposal is produced only in the goods inward sections of agricultural trade establishments and cooperatives. This dust actually consists of sandy impurities which are separated when the commodities enter the preliminary cleaning plant, and can, for example, be returned to the supplier.

3. Notes on the analysis and evaluation of environmental impacts

Large quantities of service air are used for transport, separating processes, heat discharge and aspiration in flour and hulling mills where the process technologies comprise milling and sifting techniques and abrasive and centrifugal hulling. This dust-laden air must be treated, making dust removal from air a priority concern.

Furthermore, the noise produced in such installations must of course also be given due consideration.

When planning mill projects, the various national limits must be taken into account at the design stage; if there are no adequate legal provisions, international standards must be applied. The provisions and limits applicable in Germany are quoted below by way of example.

The following legal standards and technical regulations are valid in the Federal Republic of Germany for the area under consideration:

· Bundes-Immissionsschutzgesetz, Neuauflage (New Edition) 1990

TA-Luft, 1986
TA-Lärm, 1986

· VDI-Handbuch Reinhaltung der Luft, Band 6;

VDI 2264, VDI 2263
VDI 3673

· Arbeitsblätter der Abwassertechnischen Vereinigung (ATV), November 1980 Issue

· Biologische Bundesanstalt für Land- und Forstwirtschaft

Pflanzenschutzmittel-Verzeichnis 1990.

Almost all afterproducts from flour and hulling mills can be recycled in the animal feed industry, are potential sources of energy or can be used as raw products or auxiliary materials in subsequent processing industries (oil mills and breweries, steel industry and foundries).

Emission values for local environmental protection in Germany are those specified in the TA-Lärm (Technical Instructions on Noise Abatement). The guideline of the German Association of Engineers no. 2058 requires noise protection at the workplace, with the issue of personal hearing protection from 85 dB(A) upwards, and the wearing of this protective gear from 90 dB(A). These workplaces should be labelled and compliance with safety measures monitored.

Noise level and air quality measurements in the flour milling industry provide information about environmental impact and the safety measures required to be taken.

Table 2 - Noise levels in mills handling cereal crops

This data shows that not only external noise emissions, but also workplace conditions inside the plant need to be dealt with by effective safety measures²²⁾.

²²⁾ such as machine enclosures and the wearing of hearing protection.

The Compendium of Environmental Standards provides information on assessment with regard to individual substances.

Where combustible substances are used for drying, only those with a maximum sulphur content of 1.0% are permissible.

4. Interaction with other sectors

Mills handling cereal crops perform numerous additional activities upstream and downstream, for example plant production, transport, and the handling and use of products obtained, e.g. as food. There are therefore a number of connections with other sectors; these are indicated in the text by reference to the relevant environmental briefs.

5. Summary assessment of environmental relevance

Afterproducts resulting from the process or raw materials used, which are in almost all cases used as fodder concentrate components, are produced in flour and hulling mills and in the associated drying and seed cleaning plants which process cereal and tropical grains into food for human consumption. In contrast, rice mills give rise to environmental pollution from the recycling of the husks (steam production).

Dust, which is an ever-present combustible, is a health hazard, potential source of ignition and a danger in the storage and milling industry. Precautions are taken in the form of constant maintenance and monitoring of extractor plants, dust accumulation, with temperature and humidity adjustment as associated preventive measures; personnel must be suitably be trained for this.

The emission guide values applicable for local environmental protection with regard to noise, insofar as they concern the area of production, are binding on the industry and must be observed by measures such as providing safe distances or soundproofing. Inside stores and mill buildings, the noise level is a serious problem for the employees. In the light of all we know about the long-term effects on hearing, due account must be taken of noise protection requirements at the workplace. Personal hearing protection must be issued and its use monitored.

The use of insecticides and pesticides for pest control purposes and seed disinfestation also presents problems since the substances used are highly toxic and health problems can be caused through their uncontrolled use and circulation. Only specially trained personnel using the correct equipment should be employed in these operations.

A certain amount of experience has been acquired in the field of the degradation of organic substances in process water with the help of fermenters, but a degradation tank is recommended where the wastewater is heavily polluted.

Modern mills do not give rise to substantial emissions and residues which pollute wastewater and dumps. Industrial water is only used for conditioning purposes in mills handling cereal crops and is absorbed by the grain. Mill installations with washing plants have to meet minimum requirements for the disposal of organically loaded wastewater. The same applies to industrial wastewater from bulgur or parboiled rice production.

6. References

Abwassertechnische Vereinigung (ATV), Arbeitsblatt A 115, 1980; Hinweise für das Einleiten von Abwasser in eine öffentliche Abwasseranlage.

Ammermann, K: Ausrüstung von textilen Filtermedien zur Staubabscheidung.

Bartknecht, W: Staubexplosionen (1987), Springer-Verlag.

Berufsgenossenschaft Nahrungsmittel und Gaststätten: Staubexplosionen, Mack & Metz GmbH, 68 Mannheim.

Biologische Bundesanstalt für Land- und Forstwirtschaft (German Federal Biological Research Centre for Agriculture and Forestry): Pflanzenschutzmittelverzeichnis 1990, Teil 1, 36. Auflage 1990; 6.1 Saatgutbehandlungsmittel, Teil 5, 37. Auflage 1989/90; Vorratsschutz.

DSE (German Foundation for International Development): Möglichkeiten, Grenzen und Alternativen des Pflanzenschutzmitteleinsatzes in Entwicklungsländern (1987).

DSE (German Foundation for International Development); Zeitschrift: "entwicklung und ländlicher raum" (1988).

Erste Allgemeine Verwaltungsvorschrift zum Bundes-Immissionsschutzgesetz (Technische Anleitung zur Reinhaltung der Luft - TA-Luft), 1986.

FAO: Rice parboiling, Bulletin 56, 1984.

FAO: Rice-husk conversion to energy.

Gerecke, K-H: Vademecum, Teil I - IV (1986), Technische Werte der Getreideverarbeitung und Futtermitteltechnik, Verlag Moritz Schäfer, Detmold.

GTZ: Aus Abfallbergen Strom für die Energieversorgung.

Heiss, Rudolf: Lebensmitteltechnologie (1990), Springer-Verlag.

Löffler, F: Staubabscheiden (1988), Georg Thieme Verlag, Stuttgart.

Luh, B S: Rice production and utilization (1980), AVI-Publishing Company, Inc., USA.

Mühlbauer, W: Verminderung des Energiebedarfs und Reduzierung der Staubemission bei Trocknungsanlagen.

Pomeranz, Y: Modern Cereal Science and Technology (1987), VGH-Verlagsgesellschaft, Weinheim.

Rohner, A W: Maschinenkunde für Müller (1986), Versandbuchhandlung DIE MÜHLE, Detmold.

Schäfer, Flechsig: Das Getreide. 5. Auflage (1986), Verlag Moritz Schäfer, Detmold.

Technische Anleitung zum Schutz gegen Lärm - TA-Lärm, 1986.

VDI-Handbuch Reinhaltung der Luft, Band 6

VDI-3676, Massenkraftabscheider

VDI-3677, Filternde Abscheider

VDI-3679, Naßarbeitende Abscheider

VDI-2263, Staubbrände, Staubexplosionen

VDI-3673, Druckentlastung von Staubexplosionen

VDI-2057, Einwirkungen von mechanischen Schwingungen auf den Menschen

VDI-2711, Schallschutz durch Kapselung.

Contents - Previous - Next