GRASS logo

NAME

g.gui.rlisetup - Configuration tool for r.li modules.

KEYWORDS

general, GUI, raster, landscape structure analysis

SYNOPSIS

g.gui.rlisetup
g.gui.rlisetup --help
g.gui.rlisetup [--help] [--verbose] [--quiet] [--ui]

Flags:

--help
Print usage summary
--verbose
Verbose module output
--quiet
Quiet module output
--ui
Force launching GUI dialog

Table of contents

DESCRIPTION

The g.gui.rlisetup is a wxGUI component which allows the user to create a configuration file for the analytical r.li modules. For a general introduction, see the r.li overview.
The configurations are raster map independent, it means that you can use a file created on a raster map for analyze any other you have.
The program is completely interactive and uses a GUI to help you in your choices.

Analysis methods

Definition of creation of sampling area: Sampling area definitions

Definition of region for analysis:

Usage details

The startup window shows your configuration files, you can:

TODO: description below needs further updates

  1. View/Edit (Load a file) from the shown list: the configuration is shown in a small text editor window. Configuration files are saved in the folder C:\Users\userxy\AppData\Roaming\GRASS8\r.li\ (MS-Windows) or $HOME/.r.li/ (GNU/Linux) (the file name can be defined by the user). The output or an analysis can either be a new raster map (in case of using a "moving window" analysis) or be an ASCII text file (when not performing a "moving window" analysis) containing the result. Such text file will be saved in the folder C:\Users\userxy\AppData\Roaming\GRASS8\r.li\output\ (MS-Windows) or $HOME/.grass8/r.li/output/ (GNU/Linux).
    All dimensions are percentages of raster rows or columns.
  2. Create a new configuration file: used for creating a new configuration file in an interactive way, in three steps:
    1. Choose file name and maps to use for setting:
      • Name for new configuration file(required): the name of new configuration file
      • Raster map name to use to select areas (required): the name of raster map used for selecting sampling areas
      • Vector map to overlay (optional): name of a vector map used for selecting sampling areas
    2. Set the sampling frame. The sample frame is a rectangular area which contains all the areas to analyze. It can be defined in three ways:
      • Whole map layer: the sample frame is the whole map
      • Keyboard setting: the user enters the coordinates in cells of upper left corner of sampling frame and its length in rows and columns.
      • Draw the sample frame: the user draws the sample frame on map using mouse.
    3. Set the sample areas. The sample areas are simply the areas to analyze. They can be defined in five ways (see the picture below):
      • Whole map layer: the sample area is the whole sample frame
      • Regions: the user enters the number of areas and then draws them using mouse.
      • Sample units: they are areas of rectangular or circular shape. The user can define them using keyboard or mouse.
        • keyboard: the user define the shape of sample unists and their disposition:
          • Random non overlapping: the user specifies the number of sample units and they are placed in a random way at runtime. It is guaranteed that the areas do not intersect themselves.
          • Systematic contiguous: the defined sample is placed covering the sample frame, side by side across rows.
          • Systematic non contiguous: the same as above, but here ever rectangle is spaced from another by a specified number of cells.
          • Stratified random: the sample frame is divided in n strats of rows and m strats of columns (n and m are given by user), then the specified number of sample areas are placed in a random way, one for every m*n areas defined by strats.
          • Centered over sites: the sample areas are placed into sample frame centering them on points in site file.
        • mouse: the user chooses the shape and then draws the specified number of sample areas on map.
      • Moving Window: the user defines a rectangular or circular area, it is moved over all the raster increasing only of a cell for every move(in columns if possible, if not in rows). It produces a new raster containing the result of all analysis.
      • Select areas from the overlaid vector map: the sample areas are defined by the vector map selected above. For every cat in vector map, the procedure prompts the user if they want to include it as sample area. The resulting configuration file can be used only with the specified raster map, and the procedure can be used only if whole map layer is selected as sampling frame.
  3. Remove a file the selected file is deleted from the available configuration files.
  4. Help: open this help text.
  5. Close module window.

NOTES

Configuration files are raster map independent because areas are saved using relative coordinates.

Screenshots of the wizard window frames:

 g.gui.rlisetup: First frame of wizard for selecting existing configuration files or creating a new one
g.gui.rlisetup: First frame of wizard for selecting
existing configuration files or creating a new one
 g.gui.rlisetup: Frame for selecting maps
g.gui.rlisetup: Frame for selecting maps
 g.gui.rlisetup: Frame for inserting sampling areas
g.gui.rlisetup: Frame for inserting sampling areas
 g.gui.rlisetup: Frame for defining rectangular moving window
g.gui.rlisetup: Frame for defining rectangular moving window
 g.gui.rlisetup: Frame for defining circular moving window
g.gui.rlisetup: Frame for defining circular moving window
 g.gui.rlisetup: Frame for choosing the sampling frame with keyboard
g.gui.rlisetup: Frame for choosing the sampling frame with keyboard
 g.gui.rlisetup: Frame for drawing the sampling frame
g.gui.rlisetup: Frame for drawing the sampling frame
 g.gui.rlisetup: Summary frame before saving
g.gui.rlisetup: Summary frame before saving

EXAMPLES

Moving window analysis on full region

TODO: update examples to new g.gui.rlisetup dialog:

Example for a 7x7 moving window analysis on full region, the output is a raster map:

Click on "New", then:

1. Setup sampling frame: 2. Setup sampling frame Select type of shape: 3. Save settings: click on button
(4.) Close

Now an anaysis can be performed using one of the analytical modules, e.g.

g.region raster=forests -p
r.li.patchdensity input=forests conf=movwindow7 output=forests_p_dens7
r.univar forests_p_dens7
The result is the new raster map "forests_p_dens7" which shows (in this example) the patch density of the forest areas.
See the respective modules for further examples.

Whole region analysis

Example for a whole region analysis, the output is a text file: Click on "New", then: 1. Setup sampling frame: 2. Setup sampling frame 3. Save settings: click on button
(4.) Close

Now an anaysis can be performed using one of the analytical modules, e.g.

g.region raster=lsat7_2002_40 -p
r.li.shannon input=lsat7_2000_40 conf=whole_region output=lsat7_2000_40_shannon
The result is the new text file "forests_p_dens7" (stored in folder $HOME/.r.li/output/.
See the respective modules for further examples.

REFERENCES

McGarigal, K., and B. J. Marks. 1995. FRAGSTATS: spatial pattern analysis program for quantifying landscape structure. USDA For. Serv. Gen. Tech. Rep. PNW-351. (PDF)

SEE ALSO

r.li - package overview
r.li.daemon

Old r.le suite manual (1992)

wxGUI, wxGUI components

AUTHORS

Luca Delucchi
Rewritten from r.li.setup by Claudio Porta and Lucio Davide Spano

SOURCE CODE

Available at: wxGUI RLi Setup source code (history)

Latest change: Thursday Jan 26 14:10:26 2023 in commit: cdd84c130cea04b204479e2efdc75c742efc4843


Main index | GUI index | Topics index | Keywords index | Graphical index | Full index

© 2003-2023 GRASS Development Team, GRASS GIS 8.3.dev Reference Manual