GRASS logo

NAME

g.gui.image2target - Georectifies a map and allows managing Ground Control Points for 3D correction.

KEYWORDS

imagery, GUI, aerial, photo, georectification, geometry, GCP

SYNOPSIS

g.gui.image2target
g.gui.image2target --help
g.gui.image2target [--help] [--verbose] [--quiet] [--ui]

Flags:

--help
Print usage summary
--verbose
Verbose module output
--quiet
Quiet module output
--ui
Force launching GUI dialog

Table of contents

DESCRIPTION

The GCP Manager is a wxGUI extension which allows the user to create, edit, and manage Ground Control Points. It is available from the menu "File | Manage Ground Control Points".

The GCP Manager provides an interactive graphical interface to manage and analyze Ground Control Points. A backup copy of the initial POINTS file is always maintained and updated only on request (Save GCPs to POINTS file). This guarantees that accidental changes are not permanent and can be undone by reloading the Ground Control Points.

The GCP Manager must be started in the target location, not in the source location.

The GCP Manager is structured into three panels:

Components of the GCP Manager


GCP Manager

Toolbars

Two toolbars are provided with the GCP Manager, one for managing the map displays and one for managing the GCP list.

List of ground control points

The list of Ground Control Points can be sorted by clicking on a column header. Clicking on a cloumn header will sort the GCPs ascending, a second click on the same column will sort the GCPs descending. Overall RMS error and individual RMS errors of all points are often improved if the GCP with the highest RMS error is adjusted. Individual coordinates can be edited by double-clicking on a row.

The first column holds a checkbox and displays the point number. A GCP is only used for RMS error calculation and georectification if its checkbox on the left is checked. Uncheck to deactivate a GCP (mark as unused GCP).

Two panels for map display

The left panel is used to display a map from the source location, the right panel to display a map from the target loaction. Zooming in and out is always possible with the mouse wheel and done for each map canvas separately.

GCPs are displayed in different colors, depending on whether a GCP has a high RMS error, is currently unused or is currently selected. Optionally, currently unused GCPs are not shown on the map display.

Statusbar

At the bottom of the GCP Manager is a statusbar providing several functions. The default is set to Go to GCP No. (see also below). Typing a number or using the up/down arrows will center the maps on the given GCP, useful with a high zoom.

GCP Map Display Toolbar

icon  Display map
Displays maps for source and target canvas and re-renders any layers that have changed since the last time the display was updated.
icon  Re-render map
Re-renders both source and target canvas regardless of whether they have changed or not.
icon  Erase display
Erases both source and target canvas to a white background.
icon  Define GCP (Ground Control Points)
On left mouse click, coordinates are defined for the currently selected GCP.
icon  Pan
Interactive selection of a new center of view in the active display monitor. Drag the pan cursor while pressing the left mouse button to pan. Alternatively left-click on the new center. Panning changes the location of the region displayed but not the size of the area displayed or the resolution.
icon  Zoom in
Interactive zooming with the mouse in the active map canvas (source or target). Drawing a box or just a left click with the mouse and zoom-in cursor causes the display to zoom in so that the area defined by the box fills the display. The map resolution is not changed. Clicking with the zoom-in cursor causes the display to zoom in by 30%, centered on the point where the mouse is clicked. Zooming changes the display region extents (both size and location of area displayed).
icon  Zoom out
Interactive zooming with the mouse in the active map canvas (source or target). Drawing a box or just a left click with the mouse and zoom-out cursor causes the display to zoom out so that the area displayed shrinks to fill the area defined by the box. The map resolution is not changed. Clicking with the zoom-out cursor causes the display to zoom out by 30%, centered on the point where the mouse is clicked. Zooming changes the display region extents (both size and location of area displayed).
icon  Adjust display zoom
Source and target display are adjusted by using the current GCPs for coordinate transformation:

Adjust source display to target display
The extents of the source display are adjusted to the current extents of the target display.
Adjust target display to source display
The extents of the source display are adjusted to the current extents of the target display.
Set active map canvas
Sets the currently active map canvas (source or target). Click to set active map canvas for Return to previous zoom or Zoom to extent of currently displayed map. Alternatively, move the mouse over the map canvas to be used as active canvas.
icon  Return to previous zoom
Returns to the previous zoom extent. Up to 10 levels of zoom back are maintained.
icon  Zoom to extent of currently displayed map
Zoom to the extent of the currently displayed map in the active map canvas (source or target).
icon  Settings
Shows a settings dialog for GCP management and display:

Symbology
Settings for map and GCP display:

Highlight highest RMS error only
Only the GCP with the highest RMS error will be displayed in a different colour, both in the list of GCPs and the GCP Map Display.
Factor for RMS error threshold = M + SD * factor:
All GCPs with an RMS error larger than mean RMS + RMS standard deviation * this factor will be displayed in a different colour, both in the list of GCPs and the GCP Map Display. As a rule of thumb, GCPs with an RMS error larger than M + SD * 2 are most probably wrong. GCPs with an RMS error larger than M + SD * 1 are worth closer inspection. This option is only available if Highlight highest RMS error only is unchecked.
Color
Set the color for GCPs on the GCP Map Display.
Color for high RMS error
Set the color for GCPs with a high RMS error on the GCP Map Display.
Color for selected GCP
Set the color for the currently selected GCP on the GCP Map Display.
Show unused GCPs
If unchecked, unused GCPs will not be shown on the GCP Map Display.
Color for unused GCPs
Set the color for unused GCPs on the GCP Map Display.
Symbol size
Set the symbol size for GCPs on the GCP Map Display.
Line width
Set the line width for GCPs on the GCP Map Display.
Select source map to display
Select a source map for the left pane of the GCP Map Display.
Select target map to display
Select a target map for the right pane of the GCP Map Display.

Rectification
Settings for georectification:

Select rectification method
Set the polynomial order for georectification. This order will also be used for RMS error calculation.
Clip to computational region in target location
Clip raster maps to the current computational region in the target location when georectifying.
Extension for output maps
Change the extension for output map names when doing the actual georectification.

icon  Show Help
Show help page for the GCP Manager.
icon  Quit
Quit the GCP Manager.

Toolbar for the GCP list

icon  Save GCPs to POINTS file
The current list of GCPs is saved to the imagery group's POINTS file and to a backup copy.
icon  Add new GCP
Adds a new Ground Control Point to the list and selects it for editing.
icon  Delete selected GCP
Deletes the currently selected GCP from the list.
icon  Clear selected GCP
Resets all coordinates of the currently selected GCP to 0 (zero).
icon  Reload GCPs from POINTS file
Reloads GCPs from the imagery group's POINTS file.
icon  Recalculate RMS error
Recalculates forward and backward RMS error for all GCP marked for use (activated checkbox in first row).
icon  Georectify
Uses i.rectify to georectify all images in the source imagery group.

GCP Map Display Statusbar

The GCP map display statusbar is similar to the statusbar in the regular GRASS GIS map display with two differences, Go to has been replaced with Go to GCP No. and Projection has been replaced with RMS error.

If Go to GCP No. is selected, a GCP number can be given in the left side of the statusbar and the source and target map canvas will be centered on the given GCP. Clicking on the map canvas will update coordinates for this GCP.

If RMS error is selected, the overall forward and backward RMS error is displayed.

SEE ALSO

wxGUI
wxGUI components

i.rectify, m.transform, v.rectify

See also video tutorials on GRASS Wiki.

AUTHORS

Markus Metz

Based on the Georectifier (GRASS 6.4.0) by Michael Barton
Martin Landa, Czech Technical University in Prague, Czech Republic

SOURCE CODE

Available at: wxGUI GCP Manager source code (history)

Latest change: Thursday Jan 26 14:10:26 2023 in commit: cdd84c130cea04b204479e2efdc75c742efc4843


Main index | GUI index | Topics index | Keywords index | Graphical index | Full index

© 2003-2023 GRASS Development Team, GRASS GIS 8.3.dev Reference Manual