NAME
r.green - Computes the residual energy potential of different renewable energies like biomass or hydropower.KEYWORDS
raster, biomass topicDESCRIPTION
The r.green suite computes the residual energy potential of different renewable energies like biomass, ground source heat pumps, or hydropower.The tool is organized in the module groups:
- r.green.biomassfor - computes the energy potential of biomass from the forestry residues
- r.green.gshp - computes the Ground Source Heat Pump potential
- r.green.hydro - computes the hydropower potential
These different scenarios can be compared so that the residual energy potential and the suitable places for constructing a new power plant can be identified.
All the modules of the tool r.green can be installed in GRASS GIS as following (see also r.green.install):
g.extension r.green
NOTES
The basis for creating the modules to calculate the energy potential is shown in the following image:
REFERENCES
- Garegnani, G., Geri, F., Zambelli, P., Grilli, G., Sacchelli, S., Paletto, A., Curetti, G., Ciolli, M., Vettorato, D. (2015). A new open source DSS for assessment and planning of renewable energy: r. green. Proceedings of FOSS4G Europe, Como, 14-17. (PDF)
- Garegnani, G., Zambelli, P., Geri, F., Gros, J., D'Alonzo, V., Grilli, G., Sacchelli, S., Balest, J. Curetti, G., Paletto, A., Ciolli, M., Vettorato, D. (2015): Evaluation of renewable energy potential in Pilot Areas: a Decision Support System. (PDF)
SEE ALSO
r.green.install, r.green.biomassfor, r.green.gshp, r.green.hydroAUTHOR
For authors and references, please refer to the respective module of r.green.Main index | Topics index | Keywords index | Graphical index | Full index
© 2003-2023 GRASS Development Team, GRASS GIS 8.3.dev Reference Manual