NAME
r.spreadpath - Recursively traces the least cost path backwards to cells from which the cumulative cost was determined.KEYWORDS
raster, fire, cumulative costsSYNOPSIS
Flags:
- --overwrite
- Allow output files to overwrite existing files
- --help
- Print usage summary
- --verbose
- Verbose module output
- --quiet
- Quiet module output
- --ui
- Force launching GUI dialog
Parameters:
- x_input=name [required]
- Name of raster map containing back-path easting information
- y_input=name [required]
- Name of raster map containing back-path northing information
- coordinates=east,north[,east,north,...]
- The map E and N grid coordinates of starting points
- output=name [required]
- Name for output raster map
Table of contents
DESCRIPTION
r.spreadpath is part of the wildfire simulation toolset. Preparational steps for the fire simulation are the calculation of the rate of spread (ROS) with r.ros, and the creating of spread map with r.spread. Eventually, the fire path(s) based on starting point(s) are calculated with r.spreadpath.r.spreadpath recursively traces the least cost path backwards to the origin, given backlink information input map layers and target locations from where paths are to be traced. The backlink information map layers record each cell's backlink UTM northing (the y_input) and easting (the x_input) coordinates from which the cell's cumulative cost was determined.
The backlink inputs can be generated from another GRASS raster program r.spread. One of the major applications of r.spreadpath along with r.spread is to accurately find the least cost corridors and/or paths on a raster setting. More information on r.spread and r.spreadpath can be found in Xu (1994).
Parameters:
- x_input=name
- Name of input raster map layer containing backlink UTM easting coordinates.
- y_input=name
- Name of input raster map layer containing backlink UTM northing coordinates.
- coordinates =x,y[,x,y,x,y, ...]
- Each x,y coordinate pair gives the easting and northing (respectively) geographic coordinates of a target point from which to backwards trace the least cost path. As many points as desired can be entered by the user.
- output=name
- Name of raster map layer to contain output. Also can be used as the map layer of the input target points. If so used, the input target point map will be overwritten by the output.
REFERENCES
- Xu, Jianping, 1994, Simulating the spread of wildfires using a geographic information system and remote sensing, Ph. D. Dissertation, Rutgers University, New Brunswick, New Jersey (ref).
SEE ALSO
r.spread, r.ros Sample data download: firedemo.sh (run this script within the "Fire simulation data set" location).AUTHORS
Jianping Xu and Richard G. Lathrop, Jr., Center for Remote Sensing and Spatial Analysis, Rutgers University.SOURCE CODE
Available at: r.spreadpath source code (history)
Latest change: Thursday Dec 22 23:19:03 2022 in commit: 413c99f0a2f4d875053703312b89d99516785946
Main index | Raster index | Topics index | Keywords index | Graphical index | Full index
© 2003-2023 GRASS Development Team, GRASS GIS 8.2.2dev Reference Manual