r.uslek - GRASS GIS manual

Note: This document is for an older version of GRASS GIS that will be discontinued soon. You should upgrade, and read the current manual page.

NAME

r.uslek - Computes USLE Soil Erodibility Factor (K).

KEYWORDS

raster, hydrology, soil, erosion

SYNOPSIS

r.uslek

r.uslek --help

r.uslek psand=name pclay=name psilt=name pomat=name output=name [--overwrite] [--help] [--verbose] [--quiet] [--ui]

Flags:

--overwrite: Allow output files to overwrite existing files
--help: Print usage summary
--verbose: Verbose module output
--quiet: Quiet module output
--ui: Force launching GUI dialog

Parameters:

psand=name [required]: Name of soil sand fraction raster map [0.0-1.0]
pclay=name [required]: Name of soil clay fraction raster map [0.0-1.0]
psilt=name [required]: Name of soil silt fraction raster map [0.0-1.0]
pomat=name [required]: Name of soil organic matter raster map [0.0-1.0]
output=name [required]: Name for output USLE K factor raster map [t.ha.hr/ha.MJ.mm]

DESCRIPTION
NOTES
EXAMPLE
SEE ALSO
AUTHORS

DESCRIPTION

r.uslek calculates the USLE K factor, that is the Soil Erodibility Factor. It takes input of soil texture classes (sand, clay, silt) and organic matter, all in range of [0.0-1.0]. The FAO World Soil CD documentation was used to produce the conversion system between soil textures and soil classes. The soil classes are in number of 12 and apparently come from a USDA publication of 1951 (p.209). Once the soil classes have been identified (by vector cross-products tests), a general conversion table was applied for transforming soil classes into K factor.

NOTES

r.watershed provides for USLE L, S, LS factors.

EXAMPLE

Calculate the USLE K factor (synthetic values, North Carolina sample dataset):

# NC data: simulation
g.region rural_1m -p

r.mapcalc "sand  = 0.11"
r.mapcalc "clay  = 0.47"
r.mapcalc "silt  = 0.42"
r.mapcalc "organ = 0.0136"

r.uslek psand=sand pclay=clay psilt=silt pomat=organ output=usle_k
r.univar usle_k
# Result: uslek = 0.25

Example with small variations (condition: d_sand + d_clay + d_silt => 1.0)

# NC data: simulation
r.mapcalc -s "sand_r = rand(0.09,0.13)"
r.mapcalc -s "clay_r = rand(0.45,0.49)"
r.mapcalc -s "silt_r = rand(0.40,0.44)"
r.mapcalc -s "organ  = rand(0.01,0.70)"

r.mapcalc "temp_sum = sand_r + clay_r + silt_r"
r.mapcalc "sand = sand_r / temp_sum"
r.mapcalc "clay = clay_r / temp_sum"
r.mapcalc "silt = silt_r / temp_sum"
r.mapcalc "test = sand + clay + silt"
r.info -r test
g.remove -f rast name=sand_r,clay_r,silt_r,temp_sum,test

r.uslek psand=sand pclay=clay psilt=silt pomat=organ output=usle_k
r.univar usle_k
# Result: uslek =  variable values

AUTHORS

Yann Chemin, SIC-ISDC, Turkmenistan

SOURCE CODE

Available at: r.uslek source code (history)

Latest change: Mon Nov 18 20:15:32 2019 in commit: 1a1d107e4f6e1b846f9841c2c6fabf015c5f720d