Note: This addon document is for an older version of GRASS GIS that will be discontinued soon. You should upgrade your GRASS GIS installation, and read the current addon manual page.
NAME
r.futures.devpressure - Module for computing development pressure
KEYWORDS
raster,
filter,
statistics
SYNOPSIS
r.futures.devpressure
r.futures.devpressure --help
r.futures.devpressure [-n] input=name output=name method=string size=integer [gamma=float] [scaling_factor=float] [--overwrite] [--help] [--verbose] [--quiet] [--ui]
Flags:
- -n
- Do not propagate nulls
- --overwrite
- Allow output files to overwrite existing files
- --help
- Print usage summary
- --verbose
- Verbose module output
- --quiet
- Quiet module output
- --ui
- Force launching GUI dialog
Parameters:
- input=name [required]
- Name of input binary raster map representing development
- output=name [required]
- Name of the output development pressure raster
- method=string [required]
- Method for computing development pressure
- Options: occurrence, gravity, kernel
- Default: gravity
- occurrence: number of developed cells in window
- gravity: scaling_factor / pow(distance, gamma)
- kernel: scaling_factor * exp (-2*distance / gamma)
- size=integer [required]
- Half of neighborhood size
- Default: 8
- gamma=float
- Coefficient controlling the influence of distance, needed for method gravity and kernel
- Default: 1.5
- scaling_factor=float
- Scaling factor needed for method gravity and kernel
- Default: 1
Module
r.futures.devpressure is part of
FUTURES,
land change model.
It computes development pressure, a predictor based on number of neighboring
developed cells within search distance, weighted by distance.
The development pressure variable plays a special role in the model,
allowing for a feedback between predicted change and change in subsequent steps.
There are multiple options for calculating development pressure in the model.
- occurrence: simple count of the number of developed
cells within the specified window size
- gravity: defined as scaling_factor / pow(distance, gamma)
- kernel: defined as scaling_factor * exp(-2 * distance / gamma)
Coefficient gamma is the coefficient controlling the influence of distance.
The best value for gamma is chosen during the model selection process (TODO).
The input raster is binary, value 1 represents development, value 0 no development.
The neighborhood size describes the size of the moving
window in cells (2 * size + 1).
Figure: Effect of parameters size and gamma:
a) initial development,
b) gamma = 2, size = 10,
c) gamma = 1.5, size = 10,
d) gamma = 1.5, size = 20.
By default NULL values are propagated.
This means that the edges of resulting map will be NULLs. To avoid that,
flag
n internally enlarges the computational region,
converts NULLs to zeros, performs the computation
and then patches back the original NULL values.
Module r.futures.devpressure, although written for FUTURES model,
is general enough to be used for different applications where distance pressure
can be described with the functions above.
r.futures.devpressure input=developed output=pressure gamma=1.5 size=10 method=gravity
FUTURES,
r.futures.pga,
r.futures.calib,
r.futures.demand,
r.sample.category
-
Meentemeyer, R. K., Tang, W., Dorning, M. A., Vogler, J. B., Cunniffe, N. J., & Shoemaker, D. A. (2013).
FUTURES: Multilevel Simulations of Emerging
Urban-Rural Landscape Structure Using a Stochastic Patch-Growing Algorithm.
Annals of the Association of American Geographers, 103(4), 785-807.
DOI: 10.1080/00045608.2012.707591
- Dorning, M. A., Koch, J., Shoemaker, D. A., & Meentemeyer, R. K. (2015).
Simulating urbanization scenarios reveals
tradeoffs between conservation planning strategies.
Landscape and Urban Planning, 136, 28-39.
DOI: 10.1016/j.landurbplan.2014.11.011
- Petrasova, A., Petras, V., Van Berkel, D., Harmon, B. A., Mitasova, H., & Meentemeyer, R. K. (2016).
Open Source Approach to Urban Growth Simulation.
Int. Arch. Photogramm. Remote Sens. Spatial Inf. Sci., XLI-B7, 953-959.
DOI: 10.5194/isprsarchives-XLI-B7-953-2016
Anna Petrasova,
NCSU GeoForAll
Last changed: $Date: 2018-09-14 21:49:22 -0400 (Fri, 14 Sep 2018) $
SOURCE CODE
Available at:
r.futures.devpressure source code
(history)
Latest change: Mon Nov 1 12:13:58 2021 in commit: 1a9c817b17fa46763fab60da21db214ed9ff6cb1
Note: This addon document is for an older version of GRASS GIS that will be discontinued soon. You should upgrade your GRASS GIS installation, and read the current addon manual page.
Main index |
Raster index |
Topics index |
Keywords index |
Graphical index |
Full index
© 2003-2023
GRASS Development Team,
GRASS GIS 7.8.8dev Reference Manual