r.forestfrag - GRASS GIS manual

Note: This addon document is for an older version of GRASS GIS that will be discontinued soon. You should upgrade your GRASS GIS installation, and read the current addon manual page.

NAME

r.forestfrag - Computes the forest fragmentation index (Riitters et al. 2000)

KEYWORDS

raster, landscape structure analysis, forest, fragmentation index, Riitters

SYNOPSIS

r.forestfrag

r.forestfrag --help

r.forestfrag [-rtsa] input=name output=name [size=number] [pf=name] [pff=name] [window=integer] [--overwrite] [--help] [--verbose] [--quiet] [--ui]

Flags:

-r: Set computational region to input raster map
-t: Keep Pf and Pff maps
-s: Run r.report on output map
-a: Trim the output map to avoid border effects
--overwrite: Allow output files to overwrite existing files
--help: Print usage summary
--verbose: Verbose module output
--quiet: Quiet module output
--ui: Force launching GUI dialog

Parameters:

input=name [required]: Name of forest raster map (where forest=1, non-forest=0)
output=name [required]: Name for output raster map
size=number: Moving window size (odd number); Options: 3-; Default: 3
pf=name: Name for output Pf (forest area density) raster map; Proportion of area which is forested (amount of forest)
pff=name: Name for output Pff (forest connectivity) raster map; Conditional probability that neighboring cell is forest
window=integer: This option is deprecated, use the option size instead; Options: 3-

DESCRIPTION
NOTES
EXAMPLE
SEE ALSO
AUTHORS
REFERENCES

DESCRIPTION

r.forestfrag Computes the forest fragmentation following the methodology proposed by Riitters et al. (2000). See this article for a detailed explanation.

It follows a "sliding window" algorithm with overlapping windows. The amount of forest and its occurence as adjacent forest pixels within fixed- area "moving-windows" surrounding each forest pixel is measured. The window size is user-defined. The result is stored at the location of the center pixel. Thus, a pixel value in the derived map refers to "between-pixel" fragmentation around the corresponding forest location.

As input it requires a binary map with (1) forest and (0) non-forest. Obviously, one can replace forest any other land cover type. If one wants to exclude the influence of a specific land cover type, e.g., water bodies, it should be classified as no-data (NA) in the input map. See e.g., blog post.

Let Pf be the proportion of pixels in the window that are forested. Define Pff (strictly) as the proportion of all adjacent (cardinal directions only) pixel pairs that include at least one forest pixel, for which both pixels are forested. Pff thus (roughly) estimates the conditional probability that, given a pixel of forest, its neighbor is also forest. The classification model then identifies six fragmentation categories as:

interior:       Pf = 1.0
patch:          Pf < 0.4
transitional:   0.4 ≤ Pf < 0.6
edge:           Pf ≥ 0.6 and Pf - Pff < 0
perforated:     Pf ≥ 0.6 and Pf - Pff > 0
undetermined:   Pf ≥ 0.6 and Pf = Pff

NOTES

The moving window size is user-defined (default=3) and must be an odd number. If an even number is given the function will stop with an error message.
No-data cells are ignored. This means that statistics at the raster edges are based on fewer cells (smaller) moving windows. If this is a problem, the user can choose to have the output raster trimmed with a number of raster cells equal to 1/2 * the size of the moving window.
The function respects the region. The user has however the option to set the region to match the input layer.

EXAMPLE

In the North Carolina sample Location, set the computational region to match the land classification raster map:

g.region raster=landclass96

Then mark all cells which are forest as 1 and everything else as zero:

r.mapcalc "forest = if(landclass96 == 5, 1, 0)"

Use the new forest presence raster map to compute the forest fragmentation index with window size 7:

r.forestfrag input=forest output=fragmentation window=7

Two forest fragmentation indices with window size 7 (left) and 11 (right) show how increasing window size increases the amount of edges.

AUTHORS

Emmanuel Sambale (original shell version)
Stefan Sylla (original shell version)
Paulo van Breugel (Python version, user-defined moving window size)
Vaclav Petras (major code clean up)

REFERENCES

Riitters, K., J. Wickham, R. O'Neill, B. Jones, and E. Smith. 2000. Global-scale patterns of forest fragmentation. Conservation Ecology 4(2): 3. [online] URL: http://www.consecol.org/vol4/iss2/art3/

SOURCE CODE

Available at: r.forestfrag source code (history)

Latest change: Mon Jun 28 07:54:09 2021 in commit: 1cfc0af029a35a5d6c7dae5ca7204d0eb85dbc55