Note: This addon document is for an older version of GRASS GIS that will be discontinued soon. You should upgrade your GRASS GIS installation, and read the current addon manual page.
NAME
i.eb.z0m0 - Computes momentum roughness length (z0m) and surface roughness for heat transport (z0h) after Bastiaanssen (2004).
KEYWORDS
imagery,
energy balance,
SEBAL,
SEBS,
roughness length
SYNOPSIS
i.eb.z0m0
i.eb.z0m0 --help
i.eb.z0m0 [-h] ndvi=name [coef=float] hv_max=float hmr=float output=name [z0h=name] [--overwrite] [--help] [--verbose] [--quiet] [--ui]
Flags:
- -h
- z0h output (You have to input a coef value)
- --overwrite
- Allow output files to overwrite existing files
- --help
- Print usage summary
- --verbose
- Verbose module output
- --quiet
- Quiet module output
- --ui
- Force launching GUI dialog
Parameters:
- ndvi=name [required]
- Name of the NDVI map [-1.0;1.0]
- coef=float
- Value of the converion factor from z0m and z0h (Bastiaanssen (2005) used 0.1)
- Default: 0.1
- hv_max=float [required]
- Value of the vegetation height at max(NDVI) i.e. standard C3 crop could be 1.5m
- Default: 1.5
- hmr=float [required]
- Value of the micro-relief height (h.m-r.) on flat bare ground, most references point to 2cm
- Default: 0.02
- output=name [required]
- Name of the output z0m layer
- z0h=name
- Name of the output z0h layer
i.eb.z0m0 calculates the momentum roughness length (z0m) and optionally the surface roughness for heat transport (z0h) as per SEBAL requirements from bastiaanssen (1995).
This version is calculating from a NDVI with an deterministic equation, as seen in Bastiaanssen (1995).
This is a typical input to sensible heat flux computations of any energy balance modeling.
The NDVI map input and the ndvi_max operation set, is only to get a linear relationship from NDVI to vegetation height. The latter being related to z0m by a factor 7.
If you happen to have a vegetation height (hv) map, then z0m=hv/7 and z0h=0.1*z0m. There, fixed.
i.eb.h0
i.eb.h_SEBAL95
i.eb.h_iter
i.eb.z0m
Yann Chemin, International Rice Research Institute, The Philippines
SOURCE CODE
Available at:
i.eb.z0m0 source code
(history)
Latest change: Mon Jun 28 07:54:09 2021 in commit: 1cfc0af029a35a5d6c7dae5ca7204d0eb85dbc55
Note: This addon document is for an older version of GRASS GIS that will be discontinued soon. You should upgrade your GRASS GIS installation, and read the current addon manual page.
Main index |
Imagery index |
Topics index |
Keywords index |
Graphical index |
Full index
© 2003-2023
GRASS Development Team,
GRASS GIS 7.8.8dev Reference Manual